2009 swap meet - Page 2

Craig · 10-01-2009, 08:48 AM

I got dibbs on the tailgate

drinkin_buddy · 10-01-2009, 09:27 AM

I have a rebuilt clutch bell crank for a V8 scout 800. This is the dorky tube under the scout that your clutch cable and throw out bearing arm attaches to.

IF you have a lot of slop in your clutch that you cant get rid of, this is the answer......

I rebuilt this piece with higher grade steel dowels and i even recut the channels for the E clips.

If someone has NOS fresh air vent tubes for an 800B (4.5" not 5" dia) i will be willing to swap.

Plug Ugly · 10-02-2009, 10:14 AM

ive got a 80:

- manual steering gearbox
-working speedo in good shape
-2 cluster gauges, not sure if they work or not, but am like 95 percent they do

Rico · 10-02-2009, 03:11 PM

How much for the working speedo in good shape & 2 cluster gauges ?

Lou · 10-03-2009, 08:53 PM

I've got two Scout II radiators in excellent condition, a fan shroud with minimal damage and a new cast impeller water pump. Let me know ASAP if you're interested and I can bring this to the fall rally in Dobbins.

Plug Ugly · 10-03-2009, 09:33 PM

ive also got a new reman gm alt that fits the 80's and maybe the II's?

Jesse B. · 10-05-2009, 12:41 PM

Two dana 20s - 1 for $10, the other for $20.
Scout II Window regulators - right and left side, $10 each
Scout II front fenders, minor dents, right & left side - $50 each
Scout II Chrome front and rear bumpers, good cond - $40 each

Let me know if you want something. Otherwise I may not bring it with me.

isasih · 10-05-2009, 06:02 PM

Bestop Scout II Soft Top (used) Very good condition.

Snap-on style.

I have all hardware to go with it!

Asking $500.00

Can bring to Rallye!

Save on shipping!

Any interest, Please let me know!

scouttoo · 10-05-2009, 06:23 PM

I've got used Warn locking hubs for Scout 800 and old but never used Warn locking hubs -#9062-for Scout II. Neither set has IH on the dial.

I'm planning on stopping by on Sat. even tho I'm currently Scout-less!

I'm looking for a '75 and older Scout II with V8, a cheap runner or could be made a runner for not too much $$$. I need a 4x4 for commuting on snow days to Truckee, while my '93 Cummins Dodge is torn apart for my '80 Dodge crew project. Then the Scout will be built for trail use - not pretty!

Chris

Bill USN-1 · 10-05-2009, 07:38 PM

I'll be looking for an 800 hard top.
SII power steering to bolt on the 800.
800 304 radiator.

Maybe even a good SII hard top since I dented mine!!

Scouty · 10-05-2009, 08:31 PM

Quote:

Originally Posted by Scouty

Anybody need:

1) 800 front seat that is in really good shape (SOLD)
2) set of those plastic interior panels for a hardtop
3) a bunch of late model Travelall lights and lens
4) decent passenger-side Travelall auxilary fuel tank
5) rear Travelall bumper
6) rear driver and passenger Travelall glass
7) AMC 258 brand new exhaust manifold and used stock 1bbl intake
8) AMC 258 emissions rail and smog pump
9) Stock Dana 300 gears minus the bullgear
10) Used Dana 20

Some of this crap is too heavy or big to carry with me, if you are interested in something let me know and I can bring it.

800 seat SOLD!

JAYSON · 10-06-2009, 07:23 AM

345 2bbl intake with carb that was bought 2 yr ago i think it needs a new squirt pump, thermo q carb great condition

Lyle Wiese · 10-06-2009, 07:04 PM

Much to our disappointment it looks like we have an early 80 (61-62) half cab top to sell. I installed it and found out the roll up windows don't match the top edge of the half cab. I'm told it is for the slider windows. (Didn't know there was a difference) It's coming to the Rallye bolted onto the Scout anyway.

Lyle and Linda

SS2 · 10-07-2009, 02:19 AM

I have been scrambling trying to get a set of Summer doors done for the Rallye. It looks like I'm going to make it. These will have outside handles and bolt right on to your hinges.

Do I need to say it will be a Right and a Left...

$650 for the set.

61 scout 80 · 11-28-2009, 08:42 AM

jessie what do the dana 20 fit

10-01-2009, 08:48 AM	#16 (permalink)
Craig Senior Member Join Date: Jan 2007 Member Number: 5 Location: Sacramento Posts: 752	Re: 2009 SWAP MEET I got dibbs on the tailgate __________________

10-01-2009, 09:27 AM	#17 (permalink)
drinkin_buddy Junior Member Join Date: Feb 2007 Member Number: 98 Posts: 19	Re: 2009 SWAP MEET I have a rebuilt clutch bell crank for a V8 scout 800. This is the dorky tube under the scout that your clutch cable and throw out bearing arm attaches to. IF you have a lot of slop in your clutch that you cant get rid of, this is the answer...... I rebuilt this piece with higher grade steel dowels and i even recut the channels for the E clips. If someone has NOS fresh air vent tubes for an 800B (4.5" not 5" dia) i will be willing to swap.

10-02-2009, 10:14 AM	#18 (permalink)
Plug Ugly Senior Member Join Date: Aug 2008 Member Number: 571 Location: Rocklin Posts: 148	Re: 2009 SWAP MEET ive got a 80: - manual steering gearbox -working speedo in good shape -2 cluster gauges, not sure if they work or not, but am like 95 percent they do

10-02-2009, 03:11 PM	#19 (permalink)
Rico Junior Member Join Date: Jan 2009 Member Number: 738 Location: phoenix,az Posts: 22	Re: 2009 SWAP MEET How much for the working speedo in good shape & 2 cluster gauges ? __________________ it's not the size of the dog in the fight its the size of the fight in the dog 1963 80 project Last edited by Rico; 10-02-2009 at 07:26 PM..

10-03-2009, 08:53 PM	#20 (permalink)
Lou Member Join Date: Jan 2007 Member Number: 28 Location: Sacramento Posts: 77	Re: 2009 SWAP MEET I've got two Scout II radiators in excellent condition, a fan shroud with minimal damage and a new cast impeller water pump. Let me know ASAP if you're interested and I can bring this to the fall rally in Dobbins. __________________ Lou Dinwiddie (Gun Line) 1975 Scout II XLC 345 V8, 727 auto, low gear set D20, 3.15:1 TerraLow gear set D44, F&R, 3.54:1, Detroit elockers

10-03-2009, 09:33 PM	#21 (permalink)
Plug Ugly Senior Member Join Date: Aug 2008 Member Number: 571 Location: Rocklin Posts: 148	Re: 2009 SWAP MEET ive also got a new reman gm alt that fits the 80's and maybe the II's?

10-05-2009, 12:41 PM	#22 (permalink)
Jesse B. Senior Member Join Date: Jan 2007 Member Number: 18 Posts: 111	Re: 2009 SWAP MEET Two dana 20s - 1 for $10, the other for $20. Scout II Window regulators - right and left side, $10 each Scout II front fenders, minor dents, right & left side - $50 each Scout II Chrome front and rear bumpers, good cond - $40 each Let me know if you want something. Otherwise I may not bring it with me. __________________ Jesse B. Sacramento, CA 1975 Scout II IC392, TF 727, D300 (LoMax 4:1) Rancho 2.5 Lift LS front and rear axle IHOnly RS IHCustoms Full Cage

10-05-2009, 06:02 PM	#23 (permalink)
isasih Isa's International Harvester Join Date: Feb 2007 Member Number: 53 Location: Acton,Calif. Posts: 42	Re: 2009 SWAP MEET Bestop Scout II Soft Top (used) Very good condition. Snap-on style. I have all hardware to go with it! Asking $500.00 Can bring to Rallye! Save on shipping! Any interest, Please let me know! __________________ Isa Ismail Authorized Light Line Dealer Parts,Service.Restore,Modify Custom Fabrication 661-269-0272 On Line Parts Store www.isasih.com

10-05-2009, 06:23 PM	#24 (permalink)
scouttoo Member Join Date: Oct 2007 Member Number: 342 Posts: 36	Re: 2009 SWAP MEET I've got used Warn locking hubs for Scout 800 and old but never used Warn locking hubs -#9062-for Scout II. Neither set has IH on the dial. I'm planning on stopping by on Sat. even tho I'm currently Scout-less! I'm looking for a '75 and older Scout II with V8, a cheap runner or could be made a runner for not too much $$$. I need a 4x4 for commuting on snow days to Truckee, while my '93 Cummins Dodge is torn apart for my '80 Dodge crew project. Then the Scout will be built for trail use - not pretty! Chris __________________ '76 Scout II SOLD, currently Scout-less , located in Placer Co. California

10-05-2009, 07:38 PM	#25 (permalink)
Bill USN-1 F.I. Moderator Join Date: Jan 2007 Member Number: 7 Location: Oak Harbor, WA Posts: 269	Re: 2009 SWAP MEET I'll be looking for an 800 hard top. SII power steering to bolt on the 800. 800 304 radiator. Maybe even a good SII hard top since I dented mine!!

10-06-2009, 07:23 AM	#27 (permalink)
JAYSON Senior Member Join Date: Dec 2008 Member Number: 704 Location: Hayward ca Age: 24 Posts: 173	Re: 2009 SWAP MEET 345 2bbl intake with carb that was bought 2 yr ago i think it needs a new squirt pump, thermo q carb great condition __________________ JaYsOn 74 100 4x4 Brick

10-06-2009, 07:04 PM	#28 (permalink)
Lyle Wiese Senior Member Join Date: Nov 2007 Member Number: 360 Location: Oregon City, OR Posts: 271	Re: 2009 SWAP MEET Much to our disappointment it looks like we have an early 80 (61-62) half cab top to sell. I installed it and found out the roll up windows don't match the top edge of the half cab. I'm told it is for the slider windows. (Didn't know there was a difference) It's coming to the Rallye bolted onto the Scout anyway. Lyle and Linda __________________ Most people laugh; others need an explanation! www.ihsto.org

10-07-2009, 02:19 AM	#29 (permalink)
SS2 Senior Member Join Date: Jul 2008 Member Number: 509 Posts: 699	Re: 2009 SWAP MEET I have been scrambling trying to get a set of Summer doors done for the Rallye. It looks like I'm going to make it. These will have outside handles and bolt right on to your hinges. Do I need to say it will be a Right and a Left... $650 for the set. __________________ Captain of IHSTO IHCS "One may die so many can live". KF7UBR (Nerd Name) Team Chester

11-28-2009, 08:42 AM	#30 (permalink)
61 scout 80 Junior Member Join Date: Nov 2009 Member Number: 1431 Location: Arbuckle Ca. Posts: 1	Re: 2009 SWAP MEET jessie what do the dana 20 fit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode