DAN716291

Monte Lauer · 08-13-2008, 12:03 PM

Would this be the same spline as a dodge dana 60. part number DAN716291

Michael Mayben · 08-13-2008, 04:07 PM

Is that a yoke p/n? What do you "think" it's original app is?

I have some cross-reference info here, but this question prolly needs to go to Dave. He'll be here tonite most likely and I'll have him look at the p/n. So we just need more info!

Monte Lauer · 08-13-2008, 04:29 PM

Quote:

Originally Posted by Michael Mayben

Is that a yoke p/n? What do you "think" it's original app is?

I have some cross-reference info here, but this question prolly needs to go to Dave. He'll be here tonite most likely and I'll have him look at the p/n. So we just need more info!

Here is a link to the page in the IH ONLY store refering to part number DAN716291.

Driveshaft Yoke for Dana 60 Axles - IH Only North Scout

ihojeff · 08-13-2008, 04:53 PM

Yes that yoke will work on ALL Dana 60's unless its some ancient Dana 60(50's era) with the coarse pinion spline.

Monte Lauer · 08-13-2008, 05:55 PM

Quote:

Originally Posted by ihojeff

Yes that yoke will work on ALL Dana 60's unless its some ancient Dana 60(50's era) with the coarse pinion spline.

Thank you very much.

08-13-2008, 12:03 PM	#1 (permalink)
Monte Lauer Senior Member Join Date: May 2008 Member Number: 478 Location: Second star to the right and straight on until morning. Posts: 240	DAN716291 Would this be the same spline as a dodge dana 60. part number DAN716291 __________________ 1971 Scout II 810 Trail Buggy "The Brick" 1975 Scout II Pavement Pounder "Leonidas" 1977 Scout II Mud/Sand Drag Buggy "Lil Pink Scout" Founding Member Wasted Wages Offroad

08-13-2008, 04:07 PM	#2 (permalink)
Michael Mayben Tech Moderator Join Date: Jan 2007 Member Number: 10 Location: Leaburg, Orygone Age: 61 Posts: 1,350	Re: DAN716291 Is that a yoke p/n? What do you "think" it's original app is? I have some cross-reference info here, but this question prolly needs to go to Dave. He'll be here tonite most likely and I'll have him look at the p/n. So we just need more info! __________________ EcoScout "Treehugger Mark I"

08-13-2008, 04:53 PM	#4 (permalink)
ihojeff Administrator Join Date: Jan 2007 Member Number: 1 Location: Loomis, CA(but soon to be Grass Valley) Posts: 988	Re: DAN716291 Yes that yoke will work on ALL Dana 60's unless its some ancient Dana 60(50's era) with the coarse pinion spline. __________________ Jeff Ismail IH Only North

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode