Pics of Anti Wrap Bar

Scouty · 01-26-2008, 08:20 PM

Looking for some pics of axle wrap bars. RockTractor, can you post up yours, I want something similar to it.

Thanks

Rock Tractor · 01-27-2008, 10:23 AM

I will. Give me a couple days

Matt Main · 04-11-2008, 02:39 PM

Id like to see the anti-wrap bar too.

tsm1mt · 05-13-2008, 03:34 PM

Tractor heims and 1.75x.120 DOM and some Dodge spring bushings and 1.25x.120 DOM.

I did trim the bottom of the axle tabs off so it doesn't hang down below the axle truss. Just hadn't gotten to it when I took those pictures.

2x2x.120 for the crossmember.

Another spring bushing for the bottom of the shackle.

The bracket was a little less than I wanted it to be - the 1/4" plate was a little thin, and the "rib" left after I hole-sawed the 2.75" hole for the mounting around the axle tube was too thin, and I tore it off after a couple of races.

Does it's job, though. Got rid of the bad wheel hop when I'm WOT.

Binderbound · 08-21-2008, 09:34 PM

Mine is similar to Toms except I used the ruff stuff brackets

Then I sleaved 1.5 tube with 1.75 tube. Plug welded and everything is welded to the bushing ends. 3/4x3/4 high miss rod end at the frame. Shorty shackle was used for that.

Carl Wiese · 08-22-2008, 10:22 PM

Axle end

Cross member end

It was painted a few days later, done by TracTracTor Offroad with Blue Torch Fab brackets. It's served me well, and kept me from breaking u-joints, leaf springs and yokes. All of which were getting trashed when the axle wrapped.

Craig · 08-26-2008, 08:02 AM

Nice looking setup Dan and Carl. I have some of those BTF brackets laying around some where too. This is my anti wrap for now.

01-26-2008, 08:20 PM	#1 (permalink)
Scouty Senior Member Join Date: Jan 2007 Member Number: 8 Location: Sacramento, CA Posts: 106	Pics of Anti Wrap Bar Looking for some pics of axle wrap bars. RockTractor, can you post up yours, I want something similar to it. Thanks __________________ 73 Scout II 74 Scout II

01-27-2008, 10:23 AM	#2 (permalink)
Rock Tractor Moderator Join Date: Jan 2007 Member Number: 46 Location: Lockeford Posts: 132	Re: Pics of Anti Wrap Bar I will. Give me a couple days __________________ Just your average Injected 392 Scout II on 60's and 40's Dysfunctional RockCrawlers NorCal Scouts

04-11-2008, 02:39 PM	#3 (permalink)
Matt Main Member Join Date: Apr 2008 Member Number: 446 Location: Livermore, CA Posts: 52	Re: Pics of Anti Wrap Bar Id like to see the anti-wrap bar too.

05-13-2008, 03:34 PM	#4 (permalink)
tsm1mt Junior Member Join Date: Feb 2007 Member Number: 111 Location: Helena, MT Posts: 2	Re: Pics of Anti Wrap Bar Tractor heims and 1.75x.120 DOM and some Dodge spring bushings and 1.25x.120 DOM. I did trim the bottom of the axle tabs off so it doesn't hang down below the axle truss. Just hadn't gotten to it when I took those pictures. 2x2x.120 for the crossmember. Another spring bushing for the bottom of the shackle. The bracket was a little less than I wanted it to be - the 1/4" plate was a little thin, and the "rib" left after I hole-sawed the 2.75" hole for the mounting around the axle tube was too thin, and I tore it off after a couple of races. Does it's job, though. Got rid of the bad wheel hop when I'm WOT.

08-21-2008, 09:34 PM	#5 (permalink)
Binderbound Member Join Date: Aug 2008 Member Number: 560 Location: 10x12 patch of green shag at Team Fat Shit headquarters Age: 29 Posts: 54	Re: Pics of Anti Wrap Bar Mine is similar to Toms except I used the ruff stuff brackets Then I sleaved 1.5 tube with 1.75 tube. Plug welded and everything is welded to the bushing ends. 3/4x3/4 high miss rod end at the frame. Shorty shackle was used for that. __________________ Team TracTractor Off Road STICKS AND STONES AND SCOUTS AND BONES Scout Out America

08-22-2008, 10:22 PM	#6 (permalink)
Carl Wiese Member Join Date: Jan 2007 Member Number: 13 Location: Oregon City Posts: 51	Re: Pics of Anti Wrap Bar Axle end Cross member end It was painted a few days later, done by TracTracTor Offroad with Blue Torch Fab brackets. It's served me well, and kept me from breaking u-joints, leaf springs and yokes. All of which were getting trashed when the axle wrapped.

08-26-2008, 08:02 AM	#7 (permalink)
Craig Senior Member Join Date: Jan 2007 Member Number: 5 Location: Sacramento Posts: 309	Re: Pics of Anti Wrap Bar Nice looking setup Dan and Carl. I have some of those BTF brackets laying around some where too. This is my anti wrap for now. Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode