IH ONLY NORTH - View Single Post

kabniel · 07-08-2008, 08:14 AM

I thought that on a Spread Bore intake the TB should probably sit over the larger openings. I was just wondering if maybe the adapter plate was drilled incorrectly (backwards) so that the TB has to be mounted over the smaller holes.
Yes that line runs from the intake to the brake booster. So I should have a T in the line to run from PCV to TB & also booster? If so that works for me, just means I can delete another connection, sort of.

NEW: Can anyone tell me if the throttle body is installed correctly in the picture above or not? Is the TB supposed to site above the larger or smaller openings on a Spread Bore? There should be an absolute correct way of installing it on a Spread Bore intake not just a "it should/might work fine like that" answer.

07-08-2008, 08:14 AM	#6 (permalink)
kabniel Junior Member Join Date: Feb 2008 Member Number: 423 Location: Carlisle, PA Age: 35 Posts: 13	Re: Vacuum lines I thought that on a Spread Bore intake the TB should probably sit over the larger openings. I was just wondering if maybe the adapter plate was drilled incorrectly (backwards) so that the TB has to be mounted over the smaller holes. Yes that line runs from the intake to the brake booster. So I should have a T in the line to run from PCV to TB & also booster? If so that works for me, just means I can delete another connection, sort of. NEW: Can anyone tell me if the throttle body is installed correctly in the picture above or not? Is the TB supposed to site above the larger or smaller openings on a Spread Bore? There should be an absolute correct way of installing it on a Spread Bore intake not just a "it should/might work fine like that" answer. Last edited by kabniel : 07-10-2008 at 07:15 AM.