IH ONLY NORTH - View Single Post

Craig · 09-13-2007, 12:44 PM

I have since moved the ram mount to the other side of the tierod. I added some foil insulation product to where the imitation Dynmat is, and then covered it all with foil tape to make sure it would hold up to cleaning and road debris. Mock up motor is back in as well as the tranny. Need to fab up an exhaust system and fix the drivelines. Verify that everything else will fit.
Will post a few pic's later.

09-13-2007, 12:44 PM	#5 (permalink)
Craig Senior Member Join Date: Jan 2007 Member Number: 5 Location: Sacramento Posts: 640	Re: Engine motor mount moved back 2.5" I have since moved the ram mount to the other side of the tierod. I added some foil insulation product to where the imitation Dynmat is, and then covered it all with foil tape to make sure it would hold up to cleaning and road debris. Mock up motor is back in as well as the tranny. Need to fab up an exhaust system and fix the drivelines. Verify that everything else will fit. Will post a few pic's later.